PRODUCT DESCRIPTION
Metolux Metoset Pourable Styrene Free is
a two-part free mix rapid curing concrete
repair resin and concrete anchoring system.
Specially formulated for extreme high
strength in compression & tension, it is
ideal for applications such as anchoring
large bolts, starter bars and machinery
installations.
The product has the unique packaging
system which houses the pre-mixed
aggregate & resin for fast, clean and easy
mixing.
TYPICAL USES
| |
|
 |
Repairs to large cracks in concrete surfaces requiring a self-levelling characteristic or difficult to reach areas. |
| |
|
|
Bedding-in coping stones, concrete units, steel, concrete or wooden posts. |
| |
|
|
Anchoring threaded steel bolts into solid surfaces, typically cementitious surfaces. |
| |
|
|
Stir the contents of the resin tin thoroughly
before use. Remove the cardboard dividing
card from the container.
Add all of the contents of the resin tin to
the aggregate and mix until all the resin
is incorporated into the aggregate and an
even consistency is achieved.
APPLICATION
Concrete Repair: Remove all the debris and
dust from the area to be repaired. Prior to
application the surface must be clean, dry
and sound.
Anchoring: Drill hole to correct diameter
and depth. After drilling ensure that all
debris is removed from the hole by way of
a steel brush & push pump. The anchoring
bars should be free from oil, grease or
flaking rust.
The product can be poured directly into the
appropriate area. This product should not
be applied below -5ºC. |
COVERAGE CALCULATION:
(length (cm) x width (cm) x depth (cm))
1000
= Required Litres of Product
This product should be stored between +5ºC
& +25ºC.
Shelf Life - minimum 12 months.
|
