Advantages

• Simple hammer fixing
• Excellent security fixing
• Fixes into brick and concrete
• Galvanized nail with zinc-alloy body
• Stronger than nylon hammer screws for security applications

Advantages

• Always use eye protection when driving masonry nails
• A good quality nail for safer fixing
• Average penetration into concrete is 20 – 25mm. Into softer materials deeper penetration is required.

Advantages

• • Each plug takes a variety of screws sizes with one drill size.
  • Immediate expansion when screwing into plug – preventing plug from turning.
  • Body of the plug is tapered and ribbed with a lip on top to prevent plug from being lost in a deep hole.
  • Easy entry into plug – large opening to receive screw.

Supplied with 2 corresponding SDS drills per 1 000 plugs.

The ever-popular security coach screw with the Multifix green plug.

Advantages

• Nylon plug – no separating on impact
• Fast, simple fixing
• Hammer – no screwing
• Single element – plug and screw
• Convenient packing
• Ideal for frame fixing
• No premature expansion
• Quality at a good price
• Some sizes available in stainless steel

Advantages

• Works in brick and concrete
• Through frame fixing
• Positive fix screwed in to align frame properly
•  SDS-plus or masonry drills
  available for each size

Advantages

• Zinc-plated
• A hollow – material fixing especially useful
  when fixing onto materials thicker than
  25mm
• Standard thread sizes enable longer screws
  to be used

This efficient fixing enables a permanent
fixing point to be established on Hollow
materials

Advantages

• The Brolly Anchor gives a permanent metric-threaded fixing point
• Screw can be removed and replaced at will without loss of fixing
• Relatively small hole required which means minimal damage to material on which we fix
• Load is distributed over wide area
• Quick and easy fixing to use

Advantages

Provides a secure fixing on hollow
brick by knotting up behind the
material.

WELL-PRICED, FAST AND EFFECTIVE

Advantages

• Concrete
• Brick
• Wood
• Marble
• Block
• Stone

A fixing anchor made especially for suspended ceilings and for signage that needs to be suspended

Advantages

Hole size: 6,5mm
Effective in brick and concrete
bits available for that tough concrete!

6.5 x 36

Advantages

A purpose-made anchor for fixing ceiling wire hangers or suspending sings into Concrete

• Quick-fixing and easy to use
• Complete fixing unit
• No setting tools required

Hole size: 6mm

M6 x 60

Advantages

• Same size hole-size as to diameter of stud
• Quick stud fixing for concrete only Not Brick at all
• High pull-out values and secure fix from “shear” point of view
• Available in zinc plated high tensile or mild steel
• High pull-out value thru-fixing
• A complete range of  SDS-plus or SDS-max drill bits available to ensure accurate hole sizes

Advantages

• Sleeve anchors are effective in brick and concrete if accurate hole sizes are drilled
• Ideal for through-fixing applications
• Effective in brick and concrete if accurate hole sizes are drilled
• Quick fixing to use because of small hole sizes relative to thread-size
• Complete unit per fixing – no pieces which can get lost

Hooks and eyes available

M5, M6, M8, M10, M12

This anchor is expanded by hammering on the punch inserted into the anchor which must be seated on bottom of hole.

Advantages

• Bright zinc-plated
• For fixing into concrete
• Can be set at any depth
• Ideal for threaded rods
• Pre-assembled anchor
• Four-way expansion

Advantages

• No setting tool required

This anchor is expanded when the bolt or set screw is screwed into the anchor’s thread

Multifix Studs are designed for use with our Chemical Mortar

ADVANTAGES

• Easy to use fixing with small diameter hole relative to thread size.
• Fixes into brick or concrete.
• Can be fixed easily in down position or horizontal.
• Required no expansion to set, it is a stress free fix – thus not weakening the material into which you are fixing.
• Studs available in Mild Steel, High Tensile, Brass, Stainless Steel.
• Able to be fixed underwater.
• Easily used as an insitu fixing.
• Very high pullout values because fixing becomes a bonded part of the material as opposed to being a friction fix.

METOSET POURABLE SF

Two Part Styrene Free
Multi Purpose Pourable Resin

Advantages

• Styrene free resin system
• Made from 58% recycled material
• Fast and easy repairs to dangerous cracked concrete
• For anchoring in of posts, large bolts, pillars etc.

METOBOND 1 – 1

2 Part General Purpose
Thixotropic Epoxy
Building Adhesive

Advantages

• Extremely strong structural adhesive
  with high chemical resistance
• Adhesive for concrete, brick, glass,
  metals and marble

Product Information: Chemfix Pure Epoxy 385ml

Advantages

•  Pure Epoxy is a high performance two- component epoxy resin system with high pull-out values.
• The epoxy resin is odourless and solvent free.
• The resin has a very high chemical resistance.
• Effective fixing in concrete
• Solvent free
• Suitable for variable embedment
• Can be used in damp conditions and underwater applications
• High Perfomance especially for rebar applications
• Product has no shrinkage
• For use in concrete
• Ideal for hole depths 250mm plusDOWNLOAD SPECIFICATIONS

Product Information: Polyester Resin Styrene Free (PESF)

ADVANTAGES

PESF Low Odour Resin is a high performance, rapid
curing two-part chemical system based on
a modified Polyester resin in Methacrylate monomers.
Applied in one single action, resin will produce
a cost effective strong, chemical resistant fixing.

300ml

Product Information: Chemfix CH+ Vinylester Resin, Styrene Free

ADVANTAGES

• Chemfix Vinylester Resin is a high performance.
  rapid-curing two-part chemical anchoring system
  based on a highly reactivity unsaturated Vinylester resin
  in Methacrylate monomers.
• Applied in one single action
  this hybid resin will produce a cost effective, strong,
  chemical resistant fixing.

No pre-drilling required

Finish: Zinc-plated and yellow zinc

Applications

• Garage Doors
• Pergolas
• Roof Trusses
• Any Timber Joins

Notched point drills into timber

No splitting of timber because of the sharp notched point

STRONGER THAN ANY FORCE OF NATURE

Introducing a new range of hardened steel screws that are
engineered perfectly for fast, easy hardwood fixing.

Advantages

• Wax lubricated threads
• No pre-drilling required
• Reduce the risk of splitting
• Efficient
• Fast
• Easy penetrating
• No snapping heads
• No wood too hard with Impact driver
• Wax lubricated thread
• No screw head damage with Wera Impaktor bits

Advantages

• V Head with ribs
• Stainless steel NO rusting
• Notch point- No pre-drilling required
• Good quality is cheap!

Advantages

• Made for the job!
• Self countersinking head
• Notch point for easier driving
• Wera ST.ST Bits available for extra
  neat work and corrosion resistance

IF THEY ARE NOT STAINLESS STEEEL
– THEY WILL RUST

Stainless steel and zinc-plated

Advantages

• A full range in all head forms
• Zinc-plated and stainless steel
• Blunt point stainless steel
• Pozi or slotted
• Pozi bits available in hardened steel and
  stainless steel for all screw sizes

Advantages

• Boxed per 100/200
• Pozi 2 drive
• Available ex stock
• Best driven with Wera bits for positive drive

Advantages

• A full range of sizes from 12mm – 100mm long
• Boxed in 500’s/1000’s for better stock control
• Good quality at competitive prices
• Available in finishes: yellow zinc, zinc-plated (silver)
• Pan head available in zinc-plated and black
• Some sizes available in packs of 100

Advantages

• Torx 30 or Torx 40 ensures positive drive with Wera Bits
• Reaming Thread reduces shank contact friction on longer screws
• Saw Tooth Thread reduces drive torque even in hard wood
• Notch Point has self drilling effect for fast installation

Length available 80mm – 400mm

Self-Drilling
Roofing Screw
For Steel

Advantages

• All screws comply with AS 3566
• Warranties provided
• Traceability
• Good availability

Length available 20mm – 180mm

BI-METAL

HOLE SAW

Advantages

Vari-pitch toothing for less vibration and
clean cutting, good true running

M20, M22, M25

M32, M40, M50

Advantages

• Ideal for cutting through metal.
• Used by Electricians, Plumbers etc.

Advantages

• Industrial quality high speed steel drills
• All sizes available in each group
• Ideal for BLIND RIVET appplications

For:

• Ceramics
• Tiles
• Glass

Can be resharpened.

Advantages

• Ceramic Master – Can be used for: Ceramics, Tiles, Glass.
• Spear Masonry drills have extra-long life for numerous reasons:

For all chiselling applications the correct tool is available

Advantages

• Long service life
• Forged from one piece and can be resharpened

TOP

QUALITY

RATIO CORE

DRILLS

From 40mm to 150mm
Lengths 300mm to 1500mm

CORE RATIO PILOT BIT.

Other lengths available on request.

Up to 1200mm available ex-stock

Advantages

• Fast dust clearance
• Long life
• Reduced stress on tool and operator
• Quality for hard concrete

Multi-Cutter

Diameters 6 – 16mm

For that REALLY tough concrete!

DON’T BUY CHEAP, SAVE YOURSELF MONEY AND BUY HELLER TRIJET

Advantages

• 24mm drilling capacity
• Light chiselling capacity
• 720 watt motor
• Chuck and adaptor option
  for steel drilling
• Speed control
• Left and right

Advantages

• Very popular for installation of Aircons, Alum and shower, blinds and curtains, ceiling and positioning and signage.
• Our counter sunk Rivets is also used for guttering applications.
• Our range ranes from Domed, CSK, Sealed, Large Fiange, Peeled and Grooved.
• We also have Bulb-lite/Multi-lite Rivets for stitching applications.

Advantages

• Used in conjenction with our Rivets for a good application.
• Three kinds of tools – Lazy – Tong, Hand Riveter and long arm riveter.

Advantages

• STRONG, FLEXIBLE CLIP WITH
  GOOD-QUALITY MASONRY
  NAIL

Advantages

• Flat washers: M3 – M30
• Fender Washers: M5 x 25,  M12 x 45
• Imperial: M5x20 – M8 x 25

Advantages

• Zinc plated
• Good quality
• Good availability

Advantages

• Used for cutting stone, concrete and bricks.
• High quality product.

Advantages

• Top quality durable.
• Used to cut steel.
• Available in 115mm X 230mm

Advantages

• Can be used for dry cutting.
• Available for industrial or general purpose.
• Continuous rim turbo diamond block-no jagged edges for wet and dry cutting.
• Good quality at a good price.

Advantages

• Has Tungsten carbide tips(TCT) capable of cutting at higher temperature of cutting at higher temperature than normal Saw Blades.
• 230mm TCT blade for wood. 2550 TCT blade for Aluminium.
• New Roofing Saw Blade – is ideal for roof sheeting.

Advantages

• High performance self-adhesive Butyl Tape with reinforced Aluminium film.
• Fire classified.
• Strong adhesion.

• Seals and bonds IBR and corrugated sheeting!
• Light grey in colour, is ideal for polycarb and fibreglass sheeting as it blends!
• European quality, competitively priced.